Elecbrakes trailer brake controllers: three flaws could let attackers take over braking
CISA has reported three vulnerabilities in Elecbrakes EB2, VM1 and ELBC2000 brake controllers that could allow an attacker to alter firmware and take control of a trailer's brakes. Operators of trailers and fleets using these units, which are deployed in Australia and New Zealand, are concerned.
What to do now
- Product
- Elecbrakes EB2, VM1, ELBC2000
- Affected versions
- EB2 up to and including 3.0.4.2.0; VM1 earlier than 1.3.4.2.1; ELBC2000 all versions
- Fixed in
- EB2 3.0.4.4.3; VM1 1.3.4.2.1; no fix for ELBC2000
- CVE
- CVE-2026-124281
CISA has issued an advisory covering three vulnerabilities in trailer brake controllers made by Australian manufacturer Elecbrakes. Affected models are the EB2 up to and including version 3.0.4.2.0, the VM1 in versions earlier than 1.3.4.2.1, and every version of the ELBC2000.
The flaws are tracked as CVE-2026-124281, CVE-2026-125273 and CVE-2026-96805. They fall into three weakness classes: an exposed dangerous method or function, authentication bypass through capture-replay, and missing authentication for a critical function. Only the first is described in detail: the firmware update channel is unprotected, which can allow unauthorised changes to the device firmware. The advisory does not explain how the other two work.
According to CISA, successful exploitation could let an attacker control the trailer's brakes, modify the firmware, turn off the brake lights, change braking conditions or disable other safety features. That makes this a road safety issue as much as an IT one. The advisory does not mention any exploitation in the wild.
Elecbrakes has shipped fixes for two of the three models: firmware 3.0.4.4.3 for the EB2 and firmware 1.3.4.2.1 for the VM1, both installed through the Elecbrakes mobile app. The ELBC2000, the discontinued predecessor of those units, has no fix; the vendor says it is still working out how to address the flaws on that controller.
CISA lists the products under the transportation systems sector and notes they are deployed in Australia and New Zealand, where the manufacturer is headquartered.
What to do now
- Identify every trailer or vehicle in your fleet fitted with an Elecbrakes EB2, VM1 or ELBC2000 controller and record its firmware version.
- Update EB2 units to firmware 3.0.4.4.3 and VM1 units to firmware 1.3.4.2.1 through the Elecbrakes app.
- For ELBC2000 units, which have no fix yet, watch for vendor announcements and, as general good practice, consider replacing them with a patched model.
- After updating, test brake and brake light behaviour to spot anything abnormal that could indicate tampering.